Single frame - Multi-layer
Partition made up of two or more Pladur® plasterboards screwed to each side of a galvanized steel structure, over Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, watertight/acoustic perimeter joints, etc., as well as anchors for floor and ceiling channels, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of the Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.
Filters
Partition Pladur® 120 (70-35) 4F MW
Maximum height: 5050 mm
Fire resistance: EI 120
Acoustic insulation - RA: 53.5 dBA
System thickness: 120 mm
Partition Pladur® 140 (90) 1SOLIDTEX-2N-1SOLIDTEX MW
Maximum height: 6150 mm
Acoustic insulation - RA: 54 dBA
System thickness: 140 mm
Partition Pladur® 120 (70-35) 4N MW
Maximum height: 5050 mm
Fire resistance: EI 60
Acoustic insulation - RA: 53.5 dBA
System thickness: 120 mm
Partition Pladur® 120 (70-35) 1SOLIDTEX-2H1-1SOLIDTEX MW
Maximum height: 5050 mm
Acoustic insulation - RA: 53.5 dBA
System thickness: 120 mm
Partition Pladur® 120 (70-45) 4F MW
Maximum height: 5300 mm
Fire resistance: EI 120
Acoustic insulation - RA: 53.5 dBA
System thickness: 120 mm
Partition Pladur® 150 (90) 4N MW
Maximum height: 6150 mm
Fire resistance: EI 90
Acoustic insulation - RA: 55 dBA
System thickness: 150 mm
Partition Pladur® 98 (48-35) 4OMNIA MW
Maximum height: 4000 mm
Fire resistance: EI 120
Acoustic insulation - RA: 52.5 dBA
System thickness: 98 mm
Partition Pladur® 108 (48-35) 4N MW
Maximum height: 4000 mm
Fire resistance: EI 90
Acoustic insulation - RA: 51 dBA
System thickness: 108 mm
Partition Pladur® 185 (125-45) 4I MW
Maximum height: 7300 mm
Fire resistance: EI 90
Acoustic insulation - RA: 55 dBA
System thickness: 185 mm