Ceiling Pladur® NEO

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-60 profiles set 300 mm apart, properly hung from the framing by means of Pladur® T-60 hanger brackets + Ø 6 mm threaded rod, and supported on Pladur® profiles attached mechanically around the whole perimeter. Pladur® Fon+ plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.
System weigh: 14 kg/m²
Maximum distance between hangers: 1200 mm
Absorption coefficient - αw: 0.85
System weigh: 14 kg/m²
Maximum distance between hangers: 1200 mm
Absorption coefficient - αw: 0.75
System weigh: 14 kg/m²
Maximum distance between hangers: 1200 mm
Absorption coefficient - αw: 0.75
System weigh: 14 kg/m²
Maximum distance between hangers: 1200 mm
Absorption coefficient - αw: 0.7
System weigh: 14 kg/m²
Maximum distance between hangers: 1200 mm
Absorption coefficient - αw: 0.5
System weigh: 14 kg/m²
Maximum distance between hangers: 1200 mm
Absorption coefficient - αw: 0.5
System weigh: 14 kg/m²
Maximum distance between hangers: 1200 mm
Absorption coefficient - αw: 0.6
System weigh: 14 kg/m²
Maximum distance between hangers: 1200 mm
Absorption coefficient - αw: 0.55
System weigh: 14 kg/m²
Maximum distance between hangers: 1200 mm
Absorption coefficient - αw: 0.8