Mixed Partition Pladur®: Independant lining 78 (48-35) 2N MW + Partition 78 (48-35) 2N MW + Independant lining 78 (48-35) 2N MW Free
Mixed partition made up of two independent Pladur® linings, both braced on each side by a Pladur® partition wall. Each partition is made up of a structure of galvanised sheet steel profiles, built on studs (vertical elements) and channels (horizontal elements), on whose interior side, depending on the free-standing height, the studs will need be braced with brackets attached to the core of the studs and the Pladur®, partition, leaving a space between the structure and the partition base of a minimum of 10 mm. On the exterior of each lining structure, one or two Pladur® plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on floors and ceilings, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the project). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.
Further information
Separation walls between distinct use areas (between inhabitable premises, protected or not) and between these areas and other common areas of buildings.
Documents