Ceiling Pladur® NEO
Click, Clack, Done
More information
Suspended single frame ceiling Pladur® M-70-35/S35 1x12,5 Air N MW
Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® hung from the framing by means of Pladur® hanger brackets + Ø 6 mm threaded rod, and supported on Pladur® channels mechanically attached around the whole perimeter. One or more Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.
Further information
Airborne noise insulation - RA:
64 dBA
RA increase (with 350 kg/m2 slab surface):
11 dBA
Ln,w reduction (with 350 kg/m2 slab surface):
9 dB
Maximum distance between hangers:
2550 mm
System weigh:
12 kg/m²
Plasterboard:
Pladur® Air N
Board thickness:
12.5 mm
Type of basic profile:
Stud 70/35 Z1
Number of layers:
Simple
Acoustic report number:
10.05/300.181
Specifications:
Continuous suspended ceilings for interior areas with acoustic insulation. Where a greater distance between hangers is required.
Documents