Ceiling Pladur® NEO
Click, Clack, Done
More information
Suspended ceiling Pladur® T-60 1x13 FON+ C8/18 BV MW
Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-60 profiles set 300 mm apart, properly hung from the framing by means of Pladur® T-60 hanger brackets + Ø 6 mm threaded rod, and supported on Pladur® profiles attached mechanically around the whole perimeter. Pladur® Fon+ plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.
Further information
Absorption coefficient - αm:
0.82
Absorption coefficient - αw:
0.85
Maximum distance between hangers:
1200 mm
System weigh:
14 kg/m²
Plasterboard:
Pladur® FON+ C8/18 BV
Board thickness:
12.5 mm
Type of basic profile:
Profile T-60
Number of layers:
Simple
Acoustic report number:
AC14-26053711/7
Installation method:
UNE 120043 Standard
Specifications:
Continuous ceilings that require special acoustic fitting-out for classrooms, meeting rooms, libraries, etc.
Documents